High Speed Horizontal Machining Center
A Machining Center Designed Specifically for Small Parts
To prevent the column from thermal deformation due to temperature growth and affection on the cutting accuracy due to the structural rigidity, the column is designed with a symmetrical and double-wall structure.
The base is rib reinforced for effective vibration dampening during machining, resulting in superior stability of cutting.
The spindle is a short nose design to exhibit exceptional rigidity. The spindle head is designed by Finite Element Analysis to achieve an optimal structure with increased length of locking surface, making it possible for deep hole machining.
Chips fall down by self-weight into the chip augers at both sides of the base, then chips are delivered to the screw type chip conveyor in the coolant tank. This design efficiently remove chips and heat out of the machine, hence ensuring machining accuracy at all times.
Fast, simple, dependable and long-life tool changer offers stability and dependability in tool changing.
Specially designed aluminum alloy tool pocket. Advanced cam type drive mechanism. Random tool selection. Unigue top-quality devices.
Magazine loading capacity: 24 tools
Maximum tool diameter: 125mm (without adjacent tool).
Maximum tool length: 300mm
The Magazine also features spared tool function.
Coolant Jets Around Spindle
The coolant jets around spindle device employs 4 coolant nozzles around the spindle, that provides the best cooling effect to the tool and the workpiece resulting in better machining quality.
Rotary Table (B-axis)
The rotary table is driven by a servo system.
Employ the three-piece clutch (±5″ accuracy) to ensure positioning accuracy.
High-Speed Voiceless Ball Screw
Low-noise: The design of return unit can absorbs the voice which comes from steels balls’ impact, then greatly reduce the noise.
High acceleration/deceleration velocity: the special route unit and strength design can reduce the impact force from steel balls’. Therefore, it can sustain the operating environment of high Dm-N value and high acceleration/deceleration velocities.
Roller Type Linear Motion Guide
Roller type linear ways on all three axes provide better dynamic rating load compared with its class of roller type linear way. This feature not only ensures the entire machine accuracy, but also provides the highest rigidity as well as outstanding cutting performance.
The linear motion guide features minimum wear and extra long lifespan.
Especially ideal for high speed movement and dramatically reduce the power requirement of machine.
|Control unit||FANUC Oi-MF|
|X-axis travel||1000 mm|
|Y-axis travel||800 mm|
|Z-axis travel||800 mm|
|Spindle nose to table||150~950 mm|
|Spindle nose to table center||150 mm|
|B Axis Table|
|Table size||630 x 630 mm|
|Number of table||Single pallet|
|Table loading capacity||1200 kgf|
|Table T-slot||24-M12 x 2.0 mm|
|Table indexing angle||1° (Opt. : 0.001°)|
|Servo motor||3.5 kW|
|Height from table surface to ground||1160 mm|
|Max. rotation diameter of work piece||950 mm|
|Max. work piece height||1000 mm|
|Spindle speed||6000rpm (Opt. : 12,000 rpm)|
|Spindle transmission||Belt drive (Opt. : Direct drive)|
|Spindle motor||18.5 / 22 kw|
|Rapid traverse (X/Y/Z axis)||36 / 36 / 36 M/min|
|Cutting feed rate (X/Y/Z axis)||1~10,000 mm/min|
|Tool magazine capacity||24T (Opt. : 40T / 60T / 120T)|
|Max. tool length||350 mm|
|Max. tool weight||25 kg|
|Max. tool diameter (without adjacent tool)||115 mm (200 mm)|
|ATC changing time||9 sec.|
|Power requirement||6 kg/cm²|
|Air pressure||40 KVA|
|Machine weight||9,500 kg|
|Machine height||3,180 mm|
|Machine size ( L x W)||5,290 x 4,250 mm|
• Design and specification are subject to change without prior notice.
- FANUC Oi-MF
- Spindle R.P.M.: 12000 rpm
- Spindle oil cooler
- ATC: BT40, 24T
- Spindle motor:7.5/11kW
- Roller type linear guide way
- Auger type chip conveyor
- Full enclosure guard
- Air gun
- Coolant gun
- Work light
- Electric heat exchanger
- Leveling bolts and pads
- Rigid tapping
- M30 auto power off function
- Spindle R.P.M.:BT40, 10,000 / 1,5000 rpm
- ATC: 30 tools
- Coolant through spindle (15 bar or 20 bar)
- Chain type chip conveyor
- Oil Separator
- Auto tool length measurement
- Work-piece measurement
- CE standard